Izdelki za hitri plin 615g (8)

In 2015 the product name was changed. The old product name was Castrol Special Paste AU LN 598. Molub-Alloy Paste AU LN 598 White assembly paste Description Castrol Molub-Alloy Paste AU LN 598 (previous product name Castrol Special Paste AU LN 598) is ideal for all clean assembly work as well as as a base or thin film lubrication suitable. It specifically prevents fretting corrosion . The fitting parts can be easily removed even after years. Application Castrol Molub-Alloy Paste AU LN 598 can be used as a universally applicable assembly paste, for fitting parts in environments at risk of vibration, in mechanical systems with frictional vibrations, on hydraulic cylinders and open lubrication points as well as on sliding points in vehicle and transmission construction. Product number:1127 Container size:1 Product group:Industry

Glukosesirup ist ein wichtiger Rohstoff für die Süßwaren- und Marmeladenindustrie, sowie für die Feinbäckerei und die Konfisserie. Der 45° Glukosesirup lässt sich mit der bloßen Hand zur Kugel formen, da er durch seinen höheren Trockenmassegehalt fester ist. Er kann somit z.B. gut für Kuchenglasuren, Pralinen, Modellierschokolade, Bonbons und Speiseeis verwendet werden.

Pressluft ist komprimierte Luft und wird auch als Druckluft bezeichnet. Pressluft ist normalerweise geruchsneutral, farb- und geschmackslos und entsteht, indem Kompressoren die Luft unter erhöhten Druck setzen und damit verdichten. Zur Druckluft-Erzeugung werden in erster Linie zwei Systeme genutzt: der meist 2-stufige Kolbenkompressor oder der Schraubenverdichter. Anwendung: Pressluft wird in der Pneumatik angewendet als Energieträger (Druckluftbremsen), zur Signalübertragung (analog zum elekrischen Stron), zur Reinigung, Kühlung und Stickstoff-Erzeugung und als Gs zum Atmen. UN-Nummer: UN 1002 Ventil: G 5/8" innen 25E. GK DIN477 Nr. 13 Farbe: RAL 6018 hellgrün

Castrol Anvol PE 46 B (07.09.2020) Flame-retardant hydraulic fluid Description The flame-retardant hydraulic fluid Castrol Anvol PE 46 B is based on defined, hydrolytically stable phosphoric acid esters. Castrol Anvol PE 46 B is a hydraulic fluid to be labeled as HFD 46 in accordance with DIN 51 502 or as HFDR 46 in accordance with ISO 6743-4 . Castrol Anvol PE 46 B complies with VDMA standard sheet 24 317 "Guidelines for flame-retardant hydraulic fluids" (type HFDR). The liquid is PCB-free. Application Castrol Anvol PE 46 B is preferably used as a hydraulic fluid in electro-hydraulic control systems of steam turbines. It was developed specifically for this purpose. Used as a circulation lubricant, Castrol Anvol PE 46 B is suitable for bearing lubrication of steam and gas turbines, provided they are designed for this group of materials, and it is used as a hydraulic fluid in industrial hydraulics that work in fire-hazardous environments. Product number:1409 Container size:200 Product group:Hydraulic oils

In 2015 the product name was changed. The old product name was Castrol Molub-Alloy 936 SF Heavy. Open Gear Lubricant (Solvent-Free) Description Castrol Molub-Alloy OG 936 SF Heavy (previous product name Castrol Molub-Alloy 936 SF Heavy) is an open gear lubricant specifically developed for use in heavy-duty mining and industrial equipment . Castrol Molub-Alloy OG 936 SF Heavy is designed to provide maximum protection to gearboxes and rails of large draglines and buckets, while keeping potential environmental contamination to a minimum . The contained mixture of Molub-Alloy solid lubricants optimizes wear protection and load capacity. The selected solid lubricants work synergistically with chemical anti-wear (AW) and high-pressure additives (EP), reduce temperatures in the contact zone and offer good anti-seize protection under high loads and shock loads. Product number:1828091 Container size:1 Product group:Industry

Castrol Molub-Alloy 777 NG series (05/20/2021) High-duty lubricating greases Description Castrol Molub-Alloy 777 NG high-duty lubricating grease was developed for high loads in unfavorable environmental conditions . It is manufactured and additived in such a way that it can withstand shock and heavy loads such as those found in the steel industry or in the construction industry, mining and forestry. To produce Castrol Molub-Alloy 777 NG, a mixture of high viscosity mineral oils and polymers are used, which form a tough lubricating film that can withstand shock loads and vibrations. The shear-stable thickener has a very good sealing effect against contamination if mechanical seals are damaged or missing (sealing grease collar on the bearing). The grease contains solid lubricants whose structure has been selected to meet the requirements of harsh operation in heavy industry Product number:1541181 Container size:1 Product group:Industry

EP Fluid Grease Description Castrol CLS Grease is a high pressure fluid grease developed using an optimized combination of synthetic base oil, lithium thickener technology and a specially selected additive system containing EP/anti-wear additives, antioxidants and corrosion inhibitors. Application Castrol CLS Grease is a high-quality EP fluid grease with excellent low-temperature properties, which makes it particularly suitable for use in central lubrication systems of commercial vehicles and is approved in accordance with the following approvals: - MAN 283 Li-P 00/000 - Mercedes Benz 264.0 Castrol CLS Grease is also used as an excellent multi-purpose fluid grease for industrial and automotive applications where a combination of excellent EP performance and corrosion resistance are the core requirements. Temperature range -40ºC to +100ºC Product number:1620815 Container size:25 Product group:Fluid grease

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication. Product number:1676120 Container size:1 Product group:Industry